IKA-1/D - Intrinsically safe digital camera
You can install the camera where other devices cannot operate; the Class I M1 intrinsically safe design and built‑in battery maintain video feed even in the highest methane explosion hazard zone and during power failures.
// DESCRIPTION
What it is
The IKA‑1/D intrinsically safe digital camera transmits video via a 100Base‑FX fibre‑optic Ethernet interface or a 10/100Base‑TX wired interface, with optional 2.4 GHz WiFi connectivity. You record in H.264 or MJPEG compression, up to 25 frames per second, with a 32x zoom and remote focus adjustment.
An infrared illuminator with a range of up to 60 metres and a light intensity sensor automatically switch the camera to night mode. The built‑in battery maintains continuous operation even during temporary power supply failures, while unidirectional audio and local recording on a micro SD/SDHC card complete the package.
You will install it in rooms at risk of methane explosions, within device category I M1, the highest explosion protection class.
Technical data
- ATEX certificate No.
- KDB 17 0084X
- Power supply voltage
- 10-15 VDC
- Maximum supply voltage
- 15.8 VDC
- Current consumption (15 VDC, IR off)
- 300 mA
- Current consumption (15 VDC, IR on)
- 0.9 A
- Fibre-optic transmission
- 1310 or 1530 nm, LC connector, 100 Mbps, single-mode 9/125 μm optical fibre
- Ethernet 10/100Base-TX interface
- RJ45 connector, 10/100 Mbps
- WiFi 2.4 GHz interface
- channels 2400-2483.5 MHz, output power +15 dBm
- Compression
- H.264, MJPEG
- Image sensor
- 1/3" CMOS (2 MPx)
- Maximum resolution
- 1920 x 1080 (Full HD)
- Sensitivity
- min. 0.001 lux
- Audio
- unidirectional
- Infrared illuminator
- up to 60 m
- Battery
- built-in
- Device category
- I M1
- Explosion protection type
- Ex ia I Ma or Ex ia op is I Ma
- Weight
- 2 kg
- Operating temperature range
- 0°C to 40°C
- Enclosure protection rating
- IP65
- Dimensions (enclosure)
- 127 x 310 x 166 mm