Skip to content
ATUT logoEuropean Funds
// DEVICE

AT-GAS/B/AIR - Anemometer

The AT‑GAS/B/AIR is an intrinsically safe measuring head with a built‑in anemometer, designed for continuous measurement of air flow velocity.

ATUT Gas Detection System – AT-GAS/B/AIR - Anemometer

// DESCRIPTION

What it is

Its intrinsically safe design allows operation in demanding industrial conditions, including mines with a methane explosion hazard. The terminal compartment is fitted with terminal strips and cable entries for easy connection of power and signal lines to host systems, controllers and other cooperating devices.

Its enclosure houses the electronic module with a built‑in measuring transducer, which converts the measured value into a digital signal transmitted over an RS485 interface.

The device is part of the AT‑GAS measurement and visualisation system, which consists of the AT‑GAS/A visualisation panel and the AT‑GAS/B measuring heads.

// Features

What it does

01

Measurements

  • Air flow velocity measurement from -14 to +14 m/s
  • Measurement accuracy: 2% of reading
  • Part of the AT‑GAS measurement and visualisation system (works with the AT‑GAS/A)
02

Design and Data Transmission

  • Intrinsically safe Ex ia design - Group I (M1) and Group II (2G)
  • IP65‑rated enclosure
  • Operating range: -20…+45 °C, humidity up to 95%
  • RS485 digital output - direct integration with controllers and host systems
  • Low current draw: < 20 mA at 15 V DC
  • Terminal compartment with terminals and cable entries
// Application

Where it works

01

  • Ventilation monitoring of mine workings and tunnels - both during tunnelling and throughout tunnel operation and maintenance
  • Monitoring of air velocity and flow direction in shafts, roadways and ventilation ducts
  • Safety and environmental monitoring systems
  • Hazardous areas with explosive gas atmospheres
// Parameters

Technical data

Ex marking of the AT-GAS/B/AIR measuring head
I M1 Ex ia I Ma, II 2G Ex ia IIA T3 Gb
Supply voltage
10 to 15V DC
Current draw at 15 V supply
< 20mA
Measuring range
-14 to +14 m/s
Measurement accuracy
2% of reading
Operating temperature
-20°C to +45 °C
Relative humidity
<95%
Mechanical hazard
low
Degree of protection
IP65
Dimensions (W × H × D)
178 x 148 x 100 mm
Weight
< 2kg
// Classification
Version
  • Iskrobezpieczeństwo (Ex i)
  • ATEX
  • Ex