Skip to content
ATUT logoEuropean Funds
// DEVICE

AT-GAS/B/CO2 - Carbon Dioxide Concentration Sensor

The AT‑GAS/B/CO2 is an intrinsically safe measuring head designed for continuous monitoring of carbon dioxide concentration.

ATUT Gas Detection System – AT-GAS/B/CO2 - Carbon Dioxide Concentration Sensor

// DESCRIPTION

What it is

Its intrinsically safe design allows operation in demanding industrial conditions, including mines with a methane explosion hazard. The terminal compartment is fitted with terminal strips and cable entries for easy connection of power and signal lines to host systems, controllers and other cooperating devices.

Its enclosure houses the electronic module with a built‑in measuring transducer, which converts the measured value into a digital signal transmitted over an RS485 interface.

The device is part of the AT‑GAS measurement and visualisation system, which consists of the AT‑GAS/A visualisation panel and the AT‑GAS/B measuring heads.

// Features

What it does

01

Measurements

  • Carbon dioxide concentration measurement in the 400‑5000 ppm range
  • Measurement accuracy: ±50 ppm + 3% of reading
  • Part of the AT‑GAS measurement and visualisation system (works with the AT‑GAS/A)
02

Design and Data Transmission

  • Intrinsically safe Ex ia design - Group I (M1)
  • IP65‑rated enclosure
  • Operating range: -20…+45 °C, humidity up to 95%
  • RS485 digital output - direct integration with controllers and host systems
  • Low current draw: < 20 mA at 15 V DC
  • Terminal compartment with terminals and cable entries
// Application

Where it works

01

  • Hazardous areas with explosive gas atmospheres
  • Safety and environmental monitoring systems
  • Industrial installations requiring continuous atmosphere monitoring
// Parameters

Technical data

Ex marking of the AT-GAS/B/CO2 measuring head
I M1 Ex ia I Ma
Supply voltage
10 to 15V DC
Current draw at 15 V supply
< 20mA
Measuring range
400 - 5000 ppm
Measurement accuracy
±50 ppm + 3% of reading
Operating temperature
-20°C to +45 °C
Relative humidity
<95%
Mechanical hazard
low
Degree of protection
IP65
Dimensions (W × H × D)
178 x 148 x 100 mm
Weight
< 2kg
// Classification
Version
  • Iskrobezpieczeństwo (Ex i)
  • ATEX
  • Ex