Skip to content
ATUT logo
// Rozwiązanie

Fibre-optic mesh

A fibre‑optic backbone with a mesh topology: a fault‑tolerant transmission layer that binds the systems into a single organism.

3 systems · solution “Fibre-optic mesh”
  1. // Transport and material logistics · /systemy/at-rfidAT-RFiDLost material means lost time and money. AT‑RFiD tracks every transport unit and every load on the surface of the industrial plant and underground, in real time.
  2. // Surface visualisation and archiving · /systemy/at-pzwAT-PZWData from the entire industrial plant in one place. AT‑PZW collects images and measurements from devices installed across the controlled area, displays them on the screen, and archives them. You configure and service them remotely.
  3. // Intrinsically safe MESH fibre-optic network · /systemy/atut-mfeATUT-MFEOne fibre breaks and half the industrial plant stops? Not with ATUT‑MFE. The intrinsically safe MESH network reconfigures itself, so data keeps flowing even when one element fails.
8 devices · solution “Fibre-optic mesh”
  1. /urzadzenia/at-node-wezel-komunikacyjny-iskrobezpiecznej-sieci-swiatlowodowejAT-NODE - Communication nodeA communication node combining fibre‑optic, wireless, and Ethernet signals in one enclosure. It supports intrinsically safe cameras and operates in mining facilities, tunnelling, and industry, in rooms at risk of gas and dust explosions.
  2. /urzadzenia/at-pgs-przelacznica-gornicza-swiatlowodowaAT-PGS - Fibre-optic distribution frameA fibre‑optic distribution frame for quick switching and locating faults in the network. The modular design accommodates up to 144 fibres and connects line cables with teletransmission equipment.
  3. /urzadzenia/ise-1-iskrobezpieczny-switch-ethernetISE-1 - Intrinsically safe Ethernet switchAn intrinsically safe Ethernet switch with five 10/100Base‑TX ports. It automatically detects connection speed and operates in half or full duplex mode. You connect it in a cascade to expand the network exactly where you need it.
  4. /urzadzenia/isps-2-iskrobezpieczny-serwer-portow-szeregowychISPS-2 - Intrinsically safe serial port serverAn intrinsically safe server translating the RS‑422 or RS‑485 serial network signal to 100Base‑FX fibre‑optic. It can also operate as a converter between an intrinsically safe Ethernet network and Wi‑Fi, in access point mode.
  5. /urzadzenia/km-2-konwerter-mediowKM-2 - Media converterA media converter translating the 10/100Base‑TX wired network signal to 100Base‑FX fibre‑optic. It connects underground and surface installation sections over a distance of up to 60 km, in spaces without explosion hazard or inside a flameproof (Ex d) enclosure.
  6. /urzadzenia/kmi-1-iskrobezpieczny-konwerter-mediowKMi-1 - Intrinsically safe media converterAn intrinsically safe media converter translating the 10/100Base‑TX wired network signal to 100Base‑FX fibre‑optic. It operates directly in spaces at risk of gas and dust explosions, inside an enclosure with a minimum IP54 protection rating.
  7. /urzadzenia/msfp-iskrobezpieczny-modul-interfejsuMSFP - Intrinsically safe interface moduleAn intrinsically safe SFP module connecting a network device with a single‑mode optical fibre. The "op is" protection allows direct connection to the network in a space at risk of methane and coal dust explosions.
  8. /urzadzenia/op-1-ognioszczelny-przepust-swiatlowodowyOP-1 - Flameproof (Ex d) fibre-optic glandA flameproof (Ex d) gland for optical and electrical connections between explosion‑protected enclosures. It connects one flameproof (Ex d) enclosure with another, in accordance with the PN‑EN 60079‑0 standard.